Euroindustry

Radiant floor system specifically developed for industrial applications with an electro-welded double-mesh structure for maximum resistance to loads
  • Ideal for warehouses and storage sheds with high ceilings, where the structural engineer has recommended reinforcing the screed due to the extremely high loads to be supported or soft ground.
  • High thermal performances thanks to a patented clip system, which allows for easy and secure attachment of the tubing to the metal mesh.

System dedicated to large industrial surfaces

Underfloor heating is the most effective and energy-efficient way to heat warehouses and storage sheds with high ceilings. The euroindustry system is composed of elevated tubing coupled using special clips to an electro-welded mesh which is then supported by a trellis structure or alternative system devised by a structural engineer according to the specific load requirements or geological conditions of the terrain on which the warehouse is built.

This allows the tubing to be positioned higher up, reducing the thermal resistance above the tubing and thereby ensuring unparalleled thermal performance. An alternative floor system, with the tubing installed below the screed, would require operating temperatures ~10 K higher than those used in the euroindustry system. The upper mesh that is supported by the rigging structure must be made from wire 8 mm thick.


1. Steel reinforcement
2. Expanded polystyrene insulation


Resistant to loads


The euroindustry radiant system is specifically designed for installations where the structural engineer has recommended reinforcing the screed due to the extremely high loads to be supported or soft ground.
Euroindustry is the ideal solution for industrial-type structures such as warehouses or storage sheds.


Low thermal inertia


The tubing is positioned high up and attached to an electro-welded mesh supported by a trellis structure. The elevated position significantly reduces the thermal resistance, allowing the system to operate at much lower flow temperatures thereby reducing running costs.


Special patented clip

The tubing installation process is facilitated by a patented clip system, designed specifically for the euroindustry system, which allows for easy and secure attachment of the tubing to the metal mesh and for correct tubing orientation.


1. Clip parallel to the mesh
2. Clip perpendicular to the mesh
3. Clip closure



Lifetime warranty!

 





Eurotherm radiant systems are now more secure than ever with our life long warranty. This is the exciting news agreed with partner ALLIANZ with whom Eurotherm has extended its warranty for original defects or faults to the lifetime of the radiant system on all products in the range.
 
  • Insurance without time limit on all Eurotherm products for fabric, manufacturing, assembly and/or design defects, regarding unintentional damages caused to third parties.
     
  • Third-party liability for all installation and maintenance works carried out by Eurotherm specialist staff.
     

Success stories

Complete packages recommended for this system
Now that you‘ve found a solution, you can choose the complete component and accessory package that best suits your needs from the options below.
Package Description
Euroindustry + hot/cold/air Euroindustry heating/cooling system, smartcomfort control, Command Mix and air treatment unit
Euroindustry + hot/climate control Euroindustry radiant heating system, smartcomfort, Elite black-line Command Duo with high temperature unit
Complete system components
1 - You have chosen the "Euroindustry"
If you still haven‘t find the right solution for you here,
build your own package

2 - Distribution
  • SF | S Series manifold
    Elite black-line manifold